- 1 What does the spanner light mean on a Renault?
- 2 What is a toxic fume warning light?
- 3 How do I turn my service light off?
- 4 What does spanner mean on dashboard?
- 5 What does the spanner light mean on a Mazda 2?
- 6 What does spanner light mean on Hilux?
- 7 Why has my engine management light came on?
- 8 What does the wrench light on a Mazda mean?
What does the spanner light mean on a Renault?
The spanner light usually means the car is due a service. Have a look through the drivers handbook. If you don’t have a handbook one in pdf format can be downloaded from the Renault UK website.
What is a toxic fume warning light?
It restricts the engine revs, and stops you from driving too quickly (above 30mph until the car is fixed) until you get to a garage. The toxic fume light can mean just about anything along the fuel line could need replacing, so I think you might need to take it to a garage for a fault code readout.
How do I turn my service light off?
Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.
What does spanner mean on dashboard?
Many cars will monitor the time and mileage covered since the previous service and alert you when the next is due with a spanner symbol. They monitor wear and tear on components, and then calculate when the next service is needed.
What does the spanner light mean on a Mazda 2?
When the ignition is switched ON, the wrench indicator light turns on and then turns off after a few seconds. The wrench indicator light turns on when the preset maintenance period arrives. The wrench indicator light turns on under the following conditions: The engine oil has deteriorated.
What does spanner light mean on Hilux?
This warning light indicates a low tyre inflation pressure. Adjust the tire inflation pressure to the specified level and the light will turn off after a few minutes. If the light does not turn off after inflation pressure adjustment, have the system checked by your local Toyota dealer.
Why has my engine management light came on?
Your engine management light may come on if the oxygen sensor detects your car is running fuel which is too rich or too lean. There may also be a fault with the sensor. In a petrol car, issues with your spark plugs or coils may cause the engine management light to come on.
What does the wrench light on a Mazda mean?
The wrench indicator light means the present maintenance period arrived. It will illuminate after the ignition is switched ON and it will turn off after a few seconds. If you see the Mazda wrench warning light, you should take your Mazda to a certified service center for routine maintenance.