Quick Answer: How To Open Renault Captur Bonnet?

How do you open a Renault bonnet?

To open the bonnet, open a door and pull the 1 handle, located on the left-hand side of the dashboard. To unlock, push tab 2 at the same time as opening the bonnet. Lift the bonnet and release stay 5 from its holder 6 using the handle 4.

What oil does a Renault Clio take?

Fully synthetic, high performance 5W-40 oil, for petrol and diesel vehicles including those with fuel injected and multivalved engines.

Can I use 5w30 instead of 5w40?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

What is the difference between 5w30 and 5w40?

5w30 is engine oil that has lower viscosity 5 and higher viscosity 30. 5w40 is engine oil that indicates the weight and viscosity of the engine. 5w30 has lower viscosity hence it is suitable to use in hot or lower temperatures. 5w40 has higher viscosity hence it is not suitable at all temperatures.

What happens if you put the wrong oil in your car?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

You might be interested:  FAQ: What Insurance Group Is Renault Clio 0.9?

What does 5W-30 stand for?

5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. The “W” stands for “winter,” the number preceding it indicates the oil’s viscosity (or thickness) at low temperatures (hence the W), and the number after it indicates viscosity at higher temperatures, when the engine is running.

Can I put 5W-30 in my car?

5w30 oil is particularly suitable for cars driving in cold climates. Unlike oils with a higher high temperature rating, such as 10 or 15, 5w30 oil can flow freely enough when the engine is started at low temperatures to coat and protect the engine’s internal components.

Can I put 5W40 in my BMW?

The Castrol oil that BMW used to spec was midway between a 30 and 40 weight. Anything from 0W30 to 5W40 will be fine if it has the LL-98 or LL-01 rating. You don’t even need that if you are running shorter change intervals.

Leave a Reply

Your email address will not be published. Required fields are marked *