Often asked: What Does The Service Light Mean On A Renault Clio?

What does the spanner light mean on a Clio?

Upon turning on the ignition on the Renault Clio, the spanner warning light will illuminate and extinguish as soon as the engine has started. If the warning light remains illuminated whilst driving, drive carefully and consult an approved vehicle technician as soon as possible.

What does the spanner light mean on a Renault?

The spanner light usually means the car is due a service. Have a look through the drivers handbook. If you don’t have a handbook one in pdf format can be downloaded from the Renault UK website.

What does the SERV light mean?

Serv light and ESP or traction control light on Renault Trafic: ESP symbolized by a car followed by sinuous lines to represent a slip situation, is the same as ABS a driver assistance system intended check the direction of your car in order to reduce the consequences of oversteer or understeer.

How do I turn my service light off?

Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.

How do you reset the service light on a Renault Clio 2?

Depress & hold the odometer reset button. Switch the ignition key to position 2, do not start the engine. After 30 seconds release the odometer reset button. Switch OFF the ignition.

Leave a Reply

Your email address will not be published. Required fields are marked *