- 1 Can you replace a ball joint by yourself?
- 2 Can you change ball joints without a press?
- 3 Do you need special tools to replace a ball joint?
- 4 How much does it cost to replace ball joints yourself?
- 5 How long can you drive on a bad ball joint?
- 6 How hard is it to change a ball joint?
- 7 Do upper ball joints last longer than lower ball joints?
- 8 What does it sound like when a ball joint is bad?
- 9 Is it safe to drive with bad ball joints?
- 10 How long does it take to change a ball joint?
- 11 How do I know if my ball joints are bad while driving?
- 12 Are Moog ball joints worth the money?
- 13 Are ball joints expensive to replace?
Can you replace a ball joint by yourself?
Recognizable for a knocking sound in the wheel well as you execute a turn, fixing old ball joints is an important part of keeping your vehicle road-safe. You can do it yourself for the price of the parts and the right approach.
Can you change ball joints without a press?
Replacing a Ball joint without a Press You cant, you need to take the whole control arm assembly out and give it to a professional or find a press.
Do you need special tools to replace a ball joint?
You may need to use an axle press and a socket wrench to get things started because often the axle can become dry or stuck over time. Make sure you can swing the axle shaft clear and prop it up (perhaps with a piece of wood or a tool). This frees up the lower ball joint.
How much does it cost to replace ball joints yourself?
Basic parts for a do-it-yourself project start around $30-$100 per ball joint, or $125-$400 for four, but it can cost more for luxury or rare vehicles. Some ball joints are connected to the control arm in one assembly, which must be replaced as a complete unit; part kits for this average about $500-$650.
How long can you drive on a bad ball joint?
short answer is it depends on how bad they are. the lower ball joint typically gets more wear than the upper. i’d say, if there’s just a little wiggle in either joint, you should have no problem driving 500 miles.
How hard is it to change a ball joint?
Ball joint replacement is not straightforward, as they can be very tricky to access and install – especially with age and rust. On some cars, the ball joint is integrated into the control arm. If you’re not familiar with the suspension and wheel assembly, it’s best to visit a garage for a professional check.
Do upper ball joints last longer than lower ball joints?
A ball joint is usually a ball-in socket design, lubricated with grease and covered with a dust boot. Depending on the type of suspension, most cars have both upper and lower ball joints. The lower ball joints are usually larger and wear out faster due to the weight of the front of car that rests on them.
What does it sound like when a ball joint is bad?
Metallic clunking noise: One of the most noticeable and common symptoms of a bad ball joint is a clunking or knocking noise when the suspension moves up and down. A worn ball joint will begin to rattle inside the socket when driving over an uneven road, rough terrain, potholes or speed bumps.
Is it safe to drive with bad ball joints?
You should not drive with a bad ball joint. Continuing to drive can cause damage to other vehicle components and if the joint fails completely you could lose control of the vehicle, leading to a crash and injuries.
How long does it take to change a ball joint?
It can take a little over an hour to get it replaced, so the full ball joint replacement cost will be between $100 and $400. You never know how much the mechanic is going to charge you until you get the replacement done, but it can help to have an estimate beforehand.
How do I know if my ball joints are bad while driving?
Feeling a vibration in the steering wheel while driving down a level, straight road, or your vehicle drifting to the right or left when going over bumps may also be signs of ball joint wear. Tires – Uneven tire wear may be a sign that your ball joints are wearing out.
Are Moog ball joints worth the money?
Are Moog ball joints worth the price? No. Moog is a Federal-Mogul brand, and FedMog has been aggressively taking money out of their parts for over a decade.
Are ball joints expensive to replace?
In general, ball joints are inexpensive with a range between $20 to $80 each. Labor will vary greatly by model. Some vehicles cost as low as $60 to $80. Yet others, especially four-wheel drive trucks, can range from $160 to $200 per ball joint.