FAQ: What Size Spark Plug Socket For Renault Clio?

How do I know what size spark plug socket I need?

Most spark plugs require a 5/8″ (16mm) size spark plug socket. This refers to the size of the flats on the spark plug that are in contact with the socket. This spark plug requires the 5/8″ spark plug socket, which will probably fit a 3/8 ratchet extension.

Do spark plug sockets fit all spark plugs?

This is a pretty easy question to answer no you don’t need a spark plug socket to remove and install spark plugs. A deep socket in the correct size will work in most cases, if enough patience is used and maybe some pliers to go along with the socket.

What can I use if I don’t have a spark plug wrench?

When you don’t have the correct-sized socket. If you do not have the correct sized socket for your sparkplug, what you have to do is take any aluminum sheet, roll it down according to your size, fix it in the wrench end and then try to pull out the spark plug.

Can I change my spark plugs myself?

Changing spark plugs takes about an hour (for a four-cylinder engine) and will save you at least a hundred bucks in labor if you do it yourself. In most cases it’s a simple job that will help to maintain peak performance and the highest possible gas mileage.

You might be interested:  Does Renault Captur Have Only 2 Colour Options In India?

What tool do you need to remove spark plugs?

You’ll need just a few tools to change out the spark plugs on your car. The most important tool is a socket wrench with an extension and a spark plug socket. Spark plug sockets come in two sizes: 5/8 inches and 13/16 inches. Most spark plug sockets have a rubber insert that holds the plug snugly in place.

Why do spark plug sockets have rubber?

Spark plug sockets are used to fit or remove spark plugs from engines. They will often have a foam rubber insert that sits inside the socket and serves to help hold the spark plug snugly, and prevent it from being damaged by the socket’s internal walls.

Can you change spark plugs without socket?

Bicycle, hitchhike, take the bus to the store and buy one but under no circumstances try to remove a spark plug without a spark plug wrench/socket. You are going to break the ceramic portion and render the plug inert, while making it more difficult to remove after trying to do the job without the correct tool.

Do you really need a torque wrench for spark plugs?

Spark plugs, should be torqued to manufacturers specifications. However, it is possible to tighten the plugs satisfactorily without a torque wrench. Tighten new or reused gasket spark plugs as follows: Hand tighten the spark plug until it seats.

Leave a Reply

Your email address will not be published. Required fields are marked *